Marchant Engineering Post Driver

Pneumatic Post Driver

The Pneumatic Post Driver air tool has been proven on the harsh terrain of Central Australia building long strained fencing in record time. It will drive star posts through bitumen, shale and black soil surfaces as well as ironstone and sandstone.

Used for driving in steel fencing posts, trellising posts, plastic posts, timber stakes,2 ",3 ",4 " and 5 " round or square pine posts into pre-augured or water speared holes or VERY SOFT ground.

The Post Driver weights 18kg and is easily dismantled for servicing, oiling and replacing the striking dolly.
 

The POST DRIVER comes stardard with:

  • Standard 54mm guide
  • Striking dolly in the drvier plus spare strinking dolly
  • Quick release coupling & hose clamp to connect hose to driver
  • 12mm brass tail & hose clamp to connect hose to compressor
  • Spare grub screws, lock nuts & allen key
  • 12 MONTHS WARRENTY

 

The POST DRIVER also has optional attachements

  • Various size striking dollys
  • Addaptor dolly - tool holder
  • Chisel, pick and bead breaker
  • various size guides
  • Guide Post Driver kits
  • Picker Post Puller
  • Air hose and fittings

Clip Gun

Clip Gun - An air tool that uses a wire clip to tie various types of wire netting to the fence line.

Pneumatic Post Driver Optional Attachments

Striking Dolly
There are 2 dollys in the box with the driver. A dolly will fatigue between 5,000 to 15,000 posts depending on the type of ground and how the driver is used. Farmers will probably never need another dolly while contractors will break them after continual use. It is advisable to always have a spare dolly so you can continue to use the driver if you break a dolly.

Adaptor Dolly
The adaptor dolly has a 25mm hole with 6 sets of grub screws to hold any tool you want to make up yourself. This could be a ramming bar, bead breaker, rock breaker, chisel, flat faced tamper for compacting mud brick and earthen walls etc. To use the adaptor dolly firstly remove the guide then unscrew the retaining nut and replace the striking dolly with the adaptor dolly. Do not replace the guide. Anti-seize grease needs to be used on the shank of the tool.

Chisels
Chisels are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.

Picks
Picks are 1150mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.

Bead Breaker
Bead Breakers are 38mm long and fit directly into the driver. Anti-seize grease MUST be used on the shank of the tool.

Guide Post Drive Kits
Drive kits are available for Dura-Post,Ezy-Drive and Smart posts. Other sized drive kits can be made to your needs.

Guides
The standard guide supplied is 54mm.Additional guides are available from 56mm to 145mm bore.

Plugs to suit
2 ",3 ",4 " and 5 " pipe. To be placed in the top of the pipe and then transferred to the next pipe.

Picket Post Puller
Can remove a star post from any sort of ground including bitumen without bending the post.The operator can attach the puller to the base of the post without the need to bend down. The puller then works the post out of the ground with a straight vertical action always working at ground level. A simple mechanical tool, the puller is easily used by anyone and pays for itself by recovering your posts straight and ready to reuse.

Puller Jaw
Same jaw as the puller, to use on a chain on tractor /back hoe.

Air Hose
1/2 " air hose MUST BE USED or performance of the driver will be reduced.

Turn your Stubbles into valuable feed.

Directly after harvest livestock producers should be mindful of the savings that can be made by using a Stubble mix to increase feed values of fres...

Lamb Weight Increased up-to 58%

Recent independent trials conducted at the Temora Agricultural Innovation Centre have demonstrated the positive benefit of Fabstock® supplements on...

Fabstock

A Vitamin/Mineral supplement for livestock. What is Fabstock? Fabstock is a Vitamin/Mineral supplement in granule form providing livestock...